Adsorption energy
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Adsorption Kinetic
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Aging Thermomechanical
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Alkaline Solution
Investigation on Corrosion Behavior of Nickel Nanocrystalline layers Induced by Surface Mechanical Attrition Treatment (SMAT) in Alkaline Solutions [Volume 8, Issue 2, 2019, Pages 23-32]
Aluminum 2024 alloy
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Anatase
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Anodizing
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Atom in Molecule
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
AZ31 alloy
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
B
BaFe12O19
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2019, Pages 67-77]
Barium Hexaferrite
Effect of Weight Percent and Particle Size of (Mg,Ti) Substituted Barium Hexaferrite Powder on Reflection loss Plots of Metal Back Ferrite/Acrylic Resin Composite [Volume 8, Issue 2, 2019, Pages 1-8]
Barrier layer
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Battery
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
Battery
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2019, Pages 49-56]
Bone tissue engineering
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2019, Pages 19-30]
C
Cadmium Oxide
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2019, Pages 57-65]
Carbonizing
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
Carbon nanotubes
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2019, Pages 67-77]
Carbon Nitride
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2019, Pages 1-7]
Cobalt
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
CO gas
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2019, Pages 57-65]
Continuous Casting
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Cu-Sn alloys
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
D
Density functional theory
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
Density functional theory
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2019, Pages 49-56]
DFT
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
Doping
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Dye sensitized solar cell
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
E
EBW repair welding
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
Effect of pH
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Efficiency
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
Electrical conductivity
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Electrochemical Corrosion
Evaluation the Effect of Strain on Mechanical Behavior and Electrochemical Corrosion Properties of Al-2024 Alloy after Two-Step Aging and Thermomechanical Treatments [Volume 8, Issue 2, 2019, Pages 33-41]
Electrochemical deposition
Electrochemical Deposition of Manganese Hexacyanoferrate Nanoparticles on a Graphite Substrate for Supercapacitor Application [Volume 8, Issue 3, 2019, Pages 13-20]
Electrochemical deposition
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Electroless Ni-B
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Electrolyte
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Electrospinning
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2019, Pages 19-30]
Electrospinning
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
F
Ferroelectrics
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
Ferrotic
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Filter
The Effect of Adding Sn Powder to ST316L Powder on Sinter Ability and Microstructure of Steel Filters [Volume 8, Issue 4, 2019, Pages 31-37]
Format Anion
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
Formic acid
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
FTIR
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Fuel cells
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
G
Gas Sensor
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2019, Pages 57-65]
GO
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
H
Hardness
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Heat treatment
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Heavy metals cations
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
I
Ilmenite
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Interpore Distance
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
L
Li2TiO3
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
LiFePO4
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
LiFeSO4F
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2019, Pages 49-56]
Lifetime
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
Li-ion
Theoretical evaluation of properties and behaviors of LiFeSO4F as a Li-ion battery cathode material: a DFT study [Volume 8, Issue 4, 2019, Pages 49-56]
Liquid phase sintering
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
Lithium-ion
Theoretical Evaluation of Behaviours and Properties of LiFePO4 as Li-ion Battery Cathode Material: a DFT Study [Volume 8, Issue 1, 2019, Pages 45-53]
M
Magnetic Graphene
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Manganese hexacyanoferrate
Electrochemical Deposition of Manganese Hexacyanoferrate Nanoparticles on a Graphite Substrate for Supercapacitor Application [Volume 8, Issue 3, 2019, Pages 13-20]
Mechanical properties
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
Metal-assisted chemical etching
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Metal Matrix Composite
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
Metal organic framework
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
Methanol
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
Microstructure
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
Microstructure
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
Microstructure
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Microwave absorption
Effect of Weight Percent and Particle Size of (Mg,Ti) Substituted Barium Hexaferrite Powder on Reflection loss Plots of Metal Back Ferrite/Acrylic Resin Composite [Volume 8, Issue 2, 2019, Pages 1-8]
Microwave sintering
An Investigation on Microwave Sintering and Its Effects on Crystal Structure, Microstructure and Microwave Dielectric Properties of Li2TiO3 Ceramic [Volume 8, Issue 2, 2019, Pages 53-59]
MoOx
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
N
Nanocomposite
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2019, Pages 19-30]
Nanocomposite
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Nanocomposite
Effect of Solution pH on Magnetization of Graphene-Cobalt Nanocomposite Synthesized by Electrochemical Deposition Technique [Volume 8, Issue 3, 2019, Pages 59-69]
Nanocrystalline Cu-20Zn-10Al
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
Nanofiber
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Nano-fibers
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
Nano-mechanical properties
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
Nanoparticles
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Nanopigments
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Nanosheet
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2019, Pages 1-7]
Nanostructure
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Ni-Br-Al Alloy
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
Nickel nanocrystalline layers
Investigation on Corrosion Behavior of Nickel Nanocrystalline layers Induced by Surface Mechanical Attrition Treatment (SMAT) in Alkaline Solutions [Volume 8, Issue 2, 2019, Pages 23-32]
NiTi alloy
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
NO2 gas
NO2 and CO Gas Sensing Properties of Cadmium Oxide- Based Gas Sensors [Volume 8, Issue 4, 2019, Pages 57-65]
Nuclear magnetic resonance
A Survey of Format Anion Adsorption on 101 Surface of Anatase [Volume 8, Issue 1, 2019, Pages 13-22]
O
OLED
The Optimization of Hole Injection using Composite layer Containing of Graphene Oxide/Molybdenum Oxide in order to Enhance in Lifetime of Organic Light Emitting Diode [Volume 8, Issue 3, 2019, Pages 71-77]
Optical microscopy
Microstructural, Mechanical and Electrical Behavior of Copper-Tin alloys Produced by Continuous Casting Technique [Volume 8, Issue 1, 2019, Pages 35-43]
P
Phosphorous
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Photoluminescence
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Plasma electrolytic oxidation
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
Plasma immersion ion implantation
Investigation Nano-Mechanical Properties of NiTi alloy Modified by Carbon Plasma Immersion Ion Implantation [Volume 8, Issue 2, 2019, Pages 61-68]
Polyols
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
Porous
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
Porous Parts
The Effect of Adding Sn Powder to ST316L Powder on Sinter Ability and Microstructure of Steel Filters [Volume 8, Issue 4, 2019, Pages 31-37]
Potassium phosphate
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
Powder Metallurgy
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Prealloyed Powder
Production of Cu-20Zn-10Al Nanostructured Alloy by Mechanical Alloying and Liquid Phase Sintering [Volume 8, Issue 2, 2019, Pages 43-52]
PZT
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
S
Semiconductor
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Shear strength
Theoretical and Experimental Investigations on Shear Strength of Al 6061/Gr Nanocomposites Produced by Powder Metallurgy [Volume 8, Issue 3, 2019, Pages 1-11]
Single-walled carbon nanotubes
Preparation and Evaluation of Polycaprolactone / Amine Functionalized Carbon Nanotube Electrospun Nanocomposite Scaffold Containing Mesenchymal Stem Cells for Use in Hard Tissue Engineering [Volume 8, Issue 4, 2019, Pages 19-30]
SMAT
Investigation on Corrosion Behavior of Nickel Nanocrystalline layers Induced by Surface Mechanical Attrition Treatment (SMAT) in Alkaline Solutions [Volume 8, Issue 2, 2019, Pages 23-32]
Sol-Gel
Effect of Weight Percent and Particle Size of (Mg,Ti) Substituted Barium Hexaferrite Powder on Reflection loss Plots of Metal Back Ferrite/Acrylic Resin Composite [Volume 8, Issue 2, 2019, Pages 1-8]
Sol-gel preparation
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
Solidification cracks
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
Solid State Solar Cells
Investigating the Effect of Phosphorus Concentration on the Performance of Porous Silicon Solid State Solar Cells [Volume 8, Issue 1, 2019, Pages 65-71]
Spark Plasma Sintering
The Effect of Temperature on Sintering Behavior of Fe-TiC Composite Prepared from Ilmenite by SPS Method [Volume 8, Issue 3, 2019, Pages 31-37]
SrCoO3-δ
Improved Electrocatalytic Activity of Pt-SrCoO3-δ Nanoparticles Supported on Reduced Graphene Oxide for Methanol Electrooxidation [Volume 8, Issue 3, 2019, Pages 49-58]
Steel Filters
The Effect of Adding Sn Powder to ST316L Powder on Sinter Ability and Microstructure of Steel Filters [Volume 8, Issue 4, 2019, Pages 31-37]
Sulfuric acid
Investigation the Mild and Hard Anodizing of 1100 Aluminium Alloy in Different Acidic Electrolyte, and Characterization of Obtained Oxide Film [Volume 8, Issue 1, 2019, Pages 1-12]
Surface Area
Preparation of Porous ZnO/MWCNT Nanocomposite and ZnO Nanoparticles Derived from Metal-Organic Framework and use them as Photoanode in Dye Sensitized Solar Cell (DSSC) [Volume 8, Issue 4, 2019, Pages 39-47]
T
Thermal Method
Comparison of Carbon Nitride Nanosheets Synthesized by Thermal and Ultrasonic Thermal (combined) Methods [Volume 8, Issue 4, 2019, Pages 1-7]
Thermomechanical
The Effect of Thermomechanical Process on the Corrosion Behavior of AZ31 Magnesium Alloy in Simulated Body Fluid [Volume 8, Issue 3, 2019, Pages 21-30]
Thin films
Synthesis of Lead Zirconate Titanate Nanostructured Thin Films Using Polyols [Volume 8, Issue 2, 2019, Pages 69-76]
Titanium
Evaluating the Properties of Protective Coating Prepared on Titanium Using Plasma Electrolytic Oxidation in Potassium Phosphate Electrolyte [Volume 8, Issue 1, 2019, Pages 23-33]
W
Wear
The Effect of Heat Treatment Temperature on Wear Resistance of Ni-B Coating on the C63200 Alloy Applied by Electroless Process [Volume 8, Issue 1, 2019, Pages 55-64]
X
X and Ku band
The Coating of Composite Nanoparticles of Bafe12o19/ MWCNT Using Silicon over Nowowen Substrtae for Radar Absorption In X And Ku Band [Volume 8, Issue 4, 2019, Pages 67-77]
Z
Zhs6u superalloy
Analysis of Solidification and Liquation Cracks Formation of Zhs6u Superalloy Electron Beam Welding at Different Heat Inputs [Volume 8, Issue 2, 2019, Pages 9-21]
Zinc oxide
Synthesis and Characterization of Zn1-xCoxO Nanopigments Their Colorometric Investigations [Volume 8, Issue 1, 2019, Pages 73-79]
Zinc oxide
Photoluminescence and IR Properties of Al doped ZnO Nanofibers [Volume 8, Issue 4, 2019, Pages 9-17]
Zirconia nano-particles
Kinetic Study on Surface Adsorption of Heavy Metal Cations by Nylon6/Zirconia Nano-absorbent [Volume 8, Issue 3, 2019, Pages 39-48]
